These are the instructions for setting up the AV equipment in Training Room 1; for other rooms, please return to the AV Assist landing page.
How to operate the projector:
Locate the HDMI cable found at the front of the room and plug the free end into your laptop.
Locate the four power switches at the front left of the room and make sure they’re switched on.
Using the projector remote provided, point it towards the projector and press the power button.
Please wait a few minutes for the projector to warm up. While it’s doing this it will show a black screen as it searches for the signal from your laptop. Once the signal is found it will project onto the wall.
To get sound:
Sound is received through a separate headphone cable that runs from the black DVD player located at the front left of the room. Take the end of the cable and plug it into the headphone port of your computer.
Once plugged in, press the power on button located on the provided remote (the remote has “Sony” on the bottom). Please wait while the DVD player turns on.
Once on, check the display screen says “TV/CABLE”. If it doesn’t press the “TV/CABLE” button located on the DVD player remote provided.
You can now use the volume buttons located on the remote to adjust the level of the sound.
If you have trouble with these instructions, or the instructions are not resolving your problem, please call Reception on 01603 765795 and someone will come to assist you.